410 Hi-Flame Fuel Polishing and Tank Cleaning Stabilizer

Primrose 410 Hi-Flame Fuel Stabilizer reduces the viscosity of residual fuel oils and has a fluidizing effect at all temperatures, which provides more uniform and faster pumping. Sludge and water emulsions that typically clog fuel strainers, nozzles, preheaters, and lines are dispersed throughout the fuel. This also helps eliminate the environment for bacterial or fungal growth by keeping fuel dry and clean.

Primrose 410 Hi-Flame makes the organic/inorganic deposits in the fuel system and at the burners more friable. It also forms a protective film on internal surfaces of storage tanks and piping, which reduces corrosion and deposit buildup. Stratification in tanks of poorly blended fuels, or polymer-containing waste oils, or contaminated fuels, is prevented by the stabilizing effect of this product. It provides protection against cold-end and stack corrosion.

***410 Hi-Flame has also been shown to be an excellent fuel polishing and tank cleaning additive.***

410 Hi-Flame Fuel Stabilizer is a liquid concentrate that is easy to store and easy to dispense as received. It is completely soluble in all petroleum stocks and is also a superior premium diesel fuel treatment. The sulfur content of this diesel fuel additive does not exceed 15 ppm. This diesel fuel additive complies with the federal low sulfur content requirements for use in diesel motor vehicles and nonroad engines.

 410 Hi-Flame will effectively treat No. 2 to No. 6 fuels. Treatment ratios are very economical:

 1 gallon of 410 Hi-Flame treats 8,000 gallons of No. 2 fuel.

 1 gallon of 410 Hi-Flame treats 2,000 gallons of No. 4 to No. 6 Bunker.

 1 gallon of 410 Hi-Flame treats 2,000 gallons of bulk waste oil.

 1 quart of 410 Hi-Flame treats 250 gallons of shop waste oil

 1 gallon of 410 Hi-Flame treats 1,000 to 2,000 gallons of No. 2 Diesel for fuel polishing and tank cleaning. Higher dosages may be needed for severe bulk tank problems.