All Products

All Fuel Additives, Grease, Oils & Lubricants

35 products

Which product fits the job?

Product What it solves Best for Key spec
5007 Premium Diesel Fuel Additive Injector deposits (IDID), hard cold starts, low ULSD lubricity and sludge filter plugging ULSD and biodiesel to B20 in common rail and traditional diesels, on-road and nonroad 1:1000 maintenance (1.3 oz/10 gal), 1:250 first two tanks
5757 Premium Winter Klenz ID Fuel Additive w/ Ice Check Diesel gelling and fuel icing in winter, hard cold starts and injector deposits (IDID) Winter ULSD and biodiesel to B20 in common rail and traditional diesel engines Treat rate 1:1000 (range 1:2000 to 1:500)
405C Power-Master Plus Premium Diesel Fuel Additive Low cetane diesel, black smoke, and fuel that won't stay clean and stable All diesel engines, on-road and nonroad, plus fuel oil for furnaces Treat rate: 1 gal per 3,000 gal diesel (1:3000)
406 Injector Perfector Fouled injectors and intake valves, combustion deposits, gas engine knock, ping and run-on Gasoline engines (any ethanol blend), diesel fuel systems and burner nozzles Treat rate per 20 gal: 12 oz clean-up, 3 oz keep-clean
3895 Concentrated Fuel Tank Cleaner Sludge, water and corrosion in steel fuel storage tanks and piping Steel diesel, biodiesel, gasoline and ethanol storage tanks; marine fuel systems Shock 1 gal/1,000 gal; quarterly 1 gal/2,000 to 4,000 gal
410 Hi-Flame Fuel Polishing and Tank Cleaning Stabilizer Sludge and water emulsions that clog strainers, nozzles and lines; fuel layering in tanks Diesel, heating oil, No. 4 to No. 6 Bunker and waste oil in tanks, boilers and furnaces Treat rate: 1 gal per 8,000 gal No. 2 fuel (1:8,000)
3000 Phaser Premium Gasoline Fuel Additive - Prevent and reverse phase separation Water and phase separation in ethanol gas, plus carbon, gum, sludge and varnish deposits Gasoline, marine, diesel and industrial engines, especially those running ethanol gas Maintenance rate: 1:500 (1 part per 500 parts gasoline)
403 Protect O Lube Plus Carbon, gum and varnish buildup, engine acids, sticking valves and moisture in fuel Gasoline, marine, industrial and pre-2007 on-road or pre-2011 nonroad diesel engines Treat rate: 1:300 (1:1000 maintenance, 1:100 cleanup)
327-2 Armor Plate Grease with Moly-D / NLGI #2 Wear, water washout and grease melting on heavy duty bearings, pins and joints All purpose greasing of joints, king pins and bearings on farm and industrial equipment NLGI No. 2, non-melt, Timken OK load 65 lb
327-C Armor Plate Grease with Moly-D / NLGI #3 Grease that melts in high heat, washes out or will not stay put on heavy duty equipment Construction and mining equipment, steel mills and brick plants, above freezing NLGI No. 3, non-melt, Timken OK load 80 lb
327-1 Armor Plate Grease with Moly-D / NLGI #1 Grease too stiff to pump in freezing weather or through automatic lube systems Automatic lube systems and cold weather greasing of heavy duty bearings and joints NLGI No. 1, non-melt, Timken OK load 65 lb
357-2 Armor Plate Grease with Moly-D / NLGI #2 Grease that melts in high heat, washes out, or will not pump in sub-freezing weather Ball joints, king pins, fifth wheels, wheel and roller bearings, cranes, drag lines NLGI No. 2, non-melt (no dropping point, ASTM D2265)
480M Armor Plate w/ Moly D Ultragard Weak oil film, blow-by, engine wear and high amp draw on electrically driven equipment Motor, gear, hydraulic and compressor oils; heavy duty trucks, farm tractors, excavators Mix ratio: 1:10 in engine oil (1 part 480M to 10 parts oil)
532T Seal Saver - Extend Seal Life! Leaking hydraulic seals; prevents seals drying out, shrinking, hardening or cracking Tractor hydraulic-transmission fluid, industrial hydraulic oil and hydraulic oil Treat rate: 5% to 10%, or 15% for significant seal leaks
548 / Primrose Armor Plate w/ Moly D Chain & Cable Lubricant Chain, cable and sprocket wear, rust, chain noise, and lube that drips or flings off Roller, hoist, drive and conveyor chains, sprockets, cables and wire rope Typical viscosity: 2500 SUS at 100 F, 150 SUS at 210 F
558 Enviro Blend - Rudder Stalk Grease NLGI #2 Grease washing off wet valves and bearings, or leaving an oil sheen on the water Rudder stalks, valves and bearings in contact with water NLGI No. 2, non-melt dropping point, under 1% water washout
777 Syn-O-Gen Synthetic Grease w/ Moly-D / NLGI #0 Grease that melts and runs in high heat, stops pumping in the cold, or washes out High speed and freezer bearings, brick and tile kilns, lithographic ovens, arctic service NLGI #0 full synthetic, non-melt, -40 F to 550 F range
777 Syn-O-Gen Synthetic Grease w/ Moly-D / NLGI #2 Grease that melts and runs in high heat, stops pumping in the cold, or washes out High speed and freezer bearings, brick and tile kilns, lithographic ovens, arctic service NLGI #2 full synthetic, non-melt, -40 F to 550 F range
555 Armor Plate w/ Moly-D Open Gear Lubricant Grease that washes out, slings off or pounds out of exposed gears, cables and guide rails Slow-moving or stationary open gears, racks, cables and fifth wheels, even underwater NLGI No. 2, non-melt, under 1% water washout
311 Blue Max Grease / NLGI # 0 Need a softer EP grease than No. 2 for cold weather pumping and centralized lube systems Centralized lubrication systems, extreme cold service, heavy duty equipment NLGI No. 0 lithium complex EP grease, from minus 25 F
311 Blue Max Grease / NLGI # 1 Need a softer EP grease than No. 2 for cold weather pumping and centralized lube systems Centralized lubrication systems, extreme cold service, heavy duty equipment NLGI No. 1 lithium complex EP grease, from minus 25 F
311 Blue Max Grease / NLGI # 2 Bearing wear at high rpm or heavy load, and grease washing out in wet conditions Heavy equipment, high temperature wheel bearings, high speed and electric motor bearings NLGI No. 2 lithium complex EP, approx. minus 25 to 280 F
556 Emerald Shield - Shrouded Open Gear Lubricant Open gear grease that builds up on gears and shrouds and has to be cleaned off Large shrouded open gears, such as those on ball mills with automatic lubrication Viscosity: 16,000 cSt at 40 C, 630 cSt at 100 C
216G Enviro Blend Food Grade Gear Oil Lubricating food plant gears where an NSF H-1 food grade lubricant is required Gearboxes, worm and spur gears, rotary steamers and valves in canning and food plants ISO 460, SAE 140, AGMA 7 Compounded
216 Enviro Blend Food Grade Hydraulic Oil Lubricating food plant hydraulics where an NSF H-1 food grade lubricant is required Hydraulics, air compressors, bearings, canning, bottling and food processing machinery ISO 32 (Light) or ISO 100 (Heavy)
884 Air Line Oil Preventing wear, rust and corrosion in reciprocating and rotary air tools Air tools: rotary vane and percussive tools, drills, grinders, chippers, pavement breakers Typical viscosity: 10.30 cSt at 40 C (62.8 SUS at 100 F)
623 Spindle Bright Helps prevent spindle lint build-up and moistener pad blockage on cotton pickers Mechanical cotton picker water tanks: spindles, picker bars, pivot studs and bevel gears Mix ratio: 1 quart per 50 gallons of water
323 Gin Kleen - Grease Spindle grease that breaks down and runs off under heat, plus wear and rust Late model cotton pickers with spindles designed for grease lubrication NLGI 00 grade, bentonite thickener
B620 Quick Solve Cleaner Concentrate - Biodegradable Cuts oil, grease and grime so surfaces rinse clean with water Machinery, engines, trucks, drilling rigs, dairy buildings and oily concrete floors 1 oz per gallon of water for building maintenance
234 Odyssey Motor Oil 3400 / 15W-40 Need a CK-4 15W-40 that limits engine wear, deposit buildup and early oil breakdown Heavy duty 2017+ on-highway and Tier 4 non-road diesels, CK-4 diesels, gasoline engines SAE 15W-40, API CK-4/SN synthetic blend moly oil
229 Odyssey Motor Oil 3000 / 15W-40 Engine wear, deposit buildup and oil breakdown in gasoline and most diesel engines Gasoline and most diesel engines: trucks, buses, tractors, combines, stationary generators SAE 15W-40, API CJ-4/SN
MP8 Microbicide for bulk fuel & long term storage - Hazardous Freight Bacteria, fungi and the slime sometimes called algae growing in stored fuel Commercial bulk fuel tanks, diesel generators, boats, farm and construction equipment Treat rate: 1.25 to 2.5 fl oz per 100 gallons of fuel
Tuff Jug Utility Jugs 1.25, 2.5 & 5 Gallon Overfilling and spills when pouring (Auto Stop Spout) and hard-to-check jug liquid levels Water, oils, coolants and compatible cleaning solutions for garage and workshop tasks 1.25, 2.5 and 5 gallon multilayer HDPE utility jugs

Specs are summarized from each product's manufacturer Technical Data Sheet, linked on its product page.