Recreation

Maintenance products to maximize service life and reduce downtime for all of your RV, ATV and Side by Side recreational equipment.

15 products

Which product fits the job?

Product What it solves Best for Key spec
3000 Phaser Premium Gasoline Fuel Additive - Prevent and reverse phase separation Water and phase separation in ethanol gas, plus carbon, gum, sludge and varnish deposits Gasoline, marine, diesel and industrial engines, especially those running ethanol gas Maintenance rate: 1:500 (1 part per 500 parts gasoline)
403 Protect O Lube Plus Carbon, gum and varnish buildup, engine acids, sticking valves and moisture in fuel Gasoline, marine, industrial and pre-2007 on-road or pre-2011 nonroad diesel engines Treat rate: 1:300 (1:1000 maintenance, 1:100 cleanup)
5007 Premium Diesel Fuel Additive Injector deposits (IDID), hard cold starts, low ULSD lubricity and sludge filter plugging ULSD and biodiesel to B20 in common rail and traditional diesels, on-road and nonroad 1:1000 maintenance (1.3 oz/10 gal), 1:250 first two tanks
5757 Premium Winter Klenz ID Fuel Additive w/ Ice Check Diesel gelling and fuel icing in winter, hard cold starts and injector deposits (IDID) Winter ULSD and biodiesel to B20 in common rail and traditional diesel engines Treat rate 1:1000 (range 1:2000 to 1:500)
405C Power-Master Plus Premium Diesel Fuel Additive Low cetane diesel, black smoke, and fuel that won't stay clean and stable All diesel engines, on-road and nonroad, plus fuel oil for furnaces Treat rate: 1 gal per 3,000 gal diesel (1:3000)
406 Injector Perfector Fouled injectors and intake valves, combustion deposits, gas engine knock, ping and run-on Gasoline engines (any ethanol blend), diesel fuel systems and burner nozzles Treat rate per 20 gal: 12 oz clean-up, 3 oz keep-clean
327-1 Armor Plate Grease with Moly-D / NLGI #1 Grease too stiff to pump in freezing weather or through automatic lube systems Automatic lube systems and cold weather greasing of heavy duty bearings and joints NLGI No. 1, non-melt, Timken OK load 65 lb
327-2 Armor Plate Grease with Moly-D / NLGI #2 Wear, water washout and grease melting on heavy duty bearings, pins and joints All purpose greasing of joints, king pins and bearings on farm and industrial equipment NLGI No. 2, non-melt, Timken OK load 65 lb
327-C Armor Plate Grease with Moly-D / NLGI #3 Grease that melts in high heat, washes out or will not stay put on heavy duty equipment Construction and mining equipment, steel mills and brick plants, above freezing NLGI No. 3, non-melt, Timken OK load 80 lb
357-2 Armor Plate Grease with Moly-D / NLGI #2 Grease that melts in high heat, washes out, or will not pump in sub-freezing weather Ball joints, king pins, fifth wheels, wheel and roller bearings, cranes, drag lines NLGI No. 2, non-melt (no dropping point, ASTM D2265)
480M Armor Plate w/ Moly D Ultragard Weak oil film, blow-by, engine wear and high amp draw on electrically driven equipment Motor, gear, hydraulic and compressor oils; heavy duty trucks, farm tractors, excavators Mix ratio: 1:10 in engine oil (1 part 480M to 10 parts oil)
555 Armor Plate w/ Moly-D Open Gear Lubricant Grease that washes out, slings off or pounds out of exposed gears, cables and guide rails Slow-moving or stationary open gears, racks, cables and fifth wheels, even underwater NLGI No. 2, non-melt, under 1% water washout
777 Syn-O-Gen Synthetic Grease w/ Moly-D / NLGI #0 Grease that melts and runs in high heat, stops pumping in the cold, or washes out High speed and freezer bearings, brick and tile kilns, lithographic ovens, arctic service NLGI #0 full synthetic, non-melt, -40 F to 550 F range
777 Syn-O-Gen Synthetic Grease w/ Moly-D / NLGI #2 Grease that melts and runs in high heat, stops pumping in the cold, or washes out High speed and freezer bearings, brick and tile kilns, lithographic ovens, arctic service NLGI #2 full synthetic, non-melt, -40 F to 550 F range
MP8 Microbicide for bulk fuel & long term storage - Hazardous Freight Bacteria, fungi and the slime sometimes called algae growing in stored fuel Commercial bulk fuel tanks, diesel generators, boats, farm and construction equipment Treat rate: 1.25 to 2.5 fl oz per 100 gallons of fuel

Specs are summarized from each product's manufacturer Technical Data Sheet, linked on its product page.